Tutorial - How to create a Fieldbus register file

Tutorial - How to create a Fieldbus register file

This video explains how to create and upload Fieldbus Register file


 RUN VIDEO HERE or download for local playback!


Applicable to:


'FORM' Q1

'FORM' Q2


To follow this video tutorial, you will need:


A suitable PC running CS compatible Windows OS

Airmaster 'FROM' Q1 or Q2 variant (OPTIONAL)

CS Compatible 'FORM' application software

Controls Studio V1 or higher software release

Boot Screen Uploader V1 or higher software release

Active CS 'MOUNTAINEER' or 'AVIATOR' license & subscription

The appropriate USB to Serial RS485 device and cable (OPTIONAL)

    • Related Articles

    • Tutorial - How to create custom menu pages

      This video explains how to create custom menu pages and how to upload these to your Airmaster controller. RUN VIDEO HERE or download for local playback! The maximum number of parameters per page is limited to 10 for the Q1 controllers, and 25 for the ...

    • Airmaster Q1 positive displacement compressor fieldbus table

      The standard software for a positive displacement compressor offers a number of registers which can be found in the fieldbus table. This list is valid for Modbus RTU, profibus and devicenet.

    • How to create a user profile

      This video explains how to create a new user profile and how to upload it to your Form Q1 or Q2 controller. RUN VIDEO HERE or download for local playback! Applicable to: 'FORM' Q1 'FORM' Q2 To follow this video tutorial, you will need: A suitable PC ...

    • Flashtool setup file

      Simply download the zip file,, unzip, and you will be able to run the installer for Flashtool

    • FC50 TOOL install file

      Simply unzip and run the setup file. After that you are good to go. please read the software manual before use.