How to set up Q1 for ISC (Master/Slave)

• Related Articles

• ISC function set-up instruction

  The purpose of the ISC function is to establish pressure system control in preference to using the local pressure control on all individual compressors. Once installed, the host / master air compressors Airmaster™ ISC software feature will then save ...

• I have changed the ISC rotation interval (P80.04) but the controller doesn't seem to apply the new setting.

  ISC Sequencing - Rotation Interval Q : I have changed the ISC rotation interval time (P80.04) but the controller doesn’t seem to apply the new setting (e.g. changed to 50 hrs but the sequence rotation happened after less than 24 hours). A : Please ...

• How to set-up a remote start/stop configuration on the Q1 controller?

  Remote start/stop via digital inputs        A digital input will be used to implement the start/stop function. The function of digital inputs 2 to 7 are adjustable. In the below example DI2 is used. In the P18.02 menu, set the function of DI 2 to ...

• How to connect & configure an Airmaster Q1 controller for Metacentre Master Control

  Here you can download detailed instructions on how to set up your Airmaster Q1 controller for remote load/offload control by a Metacentre Master Controller

• What is the function off the “ISC start delay”, when does it work?

  ISC start delay (P81.02) Q: What is the function off the “ISC start delay”, when does it work? A: It is a sequential start function, this feature is intended to prevent that all compressors or motors will start at the same time during a system start. ...