GUI Shot Tool

GUI Shot Tool

GUI stands for Generic User Interface. This tool makes it possible to take screenshots from the user interface of the controller.

This tutorial is applicable to:
  1. FIT
  2. FORM
To follow this video tutorial, you will need:
  1. A suitable PC running CS, compatible Windows OS.
  2. Airmaster FIT, FORM or FLEX controller.
    1. With CS Compatible application software.
  3. Controls Studio 2.0.4.0 or higher software release.
  4. Active CS 'AVIATOR' license & subscription.
  5. The appropriate USB to Serial RS485 device and cable (OPTIONAL).
Watch now (Vimeo player).  Note: that Vimeo player is not accessible in all regions.  Alternatively download using the attached MP4 file for local playback...

    • Related Articles

    • FC50 TOOL SOFTWARE MANUAL

      This manual describes how to use the FC50 tool

    • Drivers for USB NANO Programming Tool

      Download the drivers for the USB NANO programming tool by clicking on the corresponding files, listed below. For Windows XP or 7 - 32 bit operating systems : download the W_Vista_XP.zip file For Windows XP or 7 - 64 bit operating systems : download ...

    • Kit generator tool & kit usage philosophy

      ControlsStudio (CS) compatible software for Airmaster controllers are distributed in the form of a software kit (.kit extension). This kit contains all the required software to be able to program and use a controller, loaded by default settings. It ...

    • How to succesfully install the USB NANO Programming Tool on my PC?

      It is very important that the correct driver is installed for succesfull operation of your USB NANO  Programming Tool. For succesfull installation of the driver, please follow the instruction attached.

    • FC50 TOOL install file

      Simply unzip and run the setup file. After that you are good to go. please read the software manual before use.