Can the USB Nano work on a PC with a Windows 8 or 10 operating system
Yes it can but this requires upgrading the USB Nano Programmer and succesfull installation of the correct drivers.
You need a PC with Windows 7 to upgrade the USB Nano.
The upgrade procedure and drivers can be downloaded here together with the upgrade software
Related Articles
How to succesfully install the USB NANO Programming Tool on my PC?
It is very important that the correct driver is installed for succesfull operation of your USB NANO Programming Tool. For succesfull installation of the driver, please follow the instruction attached.
Drivers for USB NANO Programming Tool
Download the drivers for the USB NANO programming tool by clicking on the corresponding files, listed below. For Windows XP or 7 - 32 bit operating systems : download the W_Vista_XP.zip file For Windows XP or 7 - 64 bit operating systems : download ...
What is the function off the “ISC start delay”, when does it work?
ISC start delay (P81.02) Q: What is the function off the “ISC start delay”, when does it work? A: It is a sequential start function, this feature is intended to prevent that all compressors or motors will start at the same time during a system start. ...
ControlsStudio License USB-Dongle update request and procedure
Your ControlsStudio (CS) dongle license requires an update when one of the following situations occurs: 1. Error message (see image below) is displayed during the start-up process of CS. When the error message is displayed, the CS program is ...
The Internal System control option kit fact sheet & product manual
The Airmaster™ ISC (Internal System Control) option kit consists of a dedicated option card, AC / DC power supply and a remote pressure sensor. The purpose of the ISC option kit is to establish a dedicated source of system control pressure in ...